OK, so I've got google chrome and my default search thing is Google, but when you type in the top bar in chrome it searches with Bing and I want it all to be google, help??? thanks ! :)How can I change my search engine from Bing to Google?Click on the thing that looks like a wrench in the upper right hand corner of the browser. Go down to options and click it. Google Chrome Options will now open. In that box under the basics tab you will see second from the bottm default search with a drop down menu. Click on that drop down menu and choose Google as your default search. Click close. All done.How can I change my search engine from Bing to Google?sasikumar
seo engineer
googlecasestudy.com
Best Choice: rarely it happen. no worry
May this link too will be helpful to you.
http://www.google.com/support/forum/p/Webmasters?hl=en
If you have futher queries, please mail me or call me.
email: info@googlecasestudy.com
cell: 9884407072 (India)How can I change my search engine from Bing to Google?Click the little wrench symbol in the top right corner. Then...
Options %26gt; Basics %26gt; Default search %26gt; Google.How can I change my search engine from Bing to Google?Click Tools at the top and Options.
Monday, October 24, 2011
Is it tough to change the tranny fluid on a 2002 dodge ram 1500.?
2002.5
dodge ram 1500
5.9L 4 speed w/ od
80,000 miles
How tough would it be to change the fluid? Can I do it myself? Whats involved? Is it like changing the engine oil?Is it tough to change the tranny fluid on a 2002 dodge ram 1500.?when you drain that one you have to lower the pan to one side or it will run all over the place,once its all drained out clean off all the old gasket and let it set for as long as you can so it will drain real good and wipe down all of the insides of the transmission that you can with a few old rags,then using a new gasket or form a gasket which works just as good put it in place and torque all the bolts down evenly not real tight at first just snug them and go back over them and snug all them up,and let it set for a few minute before adding fluid to it,if not it may leak on you,and make sure before you put the pan on that you straiten the pan up where the old bolts have drawn it up and caused small indents where the bolt go this will help assure it gets a good tight seal again,once all this is done refill it and start it and let it idle and proceed to fill it to the full mark when it reaches operating temperature,and check for leaks,its a simple job but time consuming,good luck with it.Is it tough to change the tranny fluid on a 2002 dodge ram 1500.?its not real hard, similar to oil. drain it and put fresh in, make sure you get the right weight( ask the auto store)Is it tough to change the tranny fluid on a 2002 dodge ram 1500.?Basically, the difference is you have to take the tranny pan off and clean up the gasket off the pan and tranny with (I use) a wire wheel on my drill and spray everything with electrical parts cleaner then wipe a couple times with a rag making sure you didn't leave anything behind. Then pull the filter out, they usually just push in to place. Then it depends on the gasket whether or not you use a sealer but I prefer the high tack adhesive because i've never had a leak with it. It pretty much works like rubber cement, but better. You just apply a really thin layer on both sides and let it dry then stick it making real sure the bolt holes are lined up by starting a couple bolts in the pan then putting in the rest. Just a little more than snug the bolts up after you have them all put back in making sure to not squeeze the gasket out cracking it.Is it tough to change the tranny fluid on a 2002 dodge ram 1500.?I think it would be more cost effective and convenient to have the transmission flushed instead of just changing the oil in the pan. You would only be replacing half the fluid just by dropping the pan. A tranmission fluid flush would replace 99% of the fluids. Best of luck.
dodge ram 1500
5.9L 4 speed w/ od
80,000 miles
How tough would it be to change the fluid? Can I do it myself? Whats involved? Is it like changing the engine oil?Is it tough to change the tranny fluid on a 2002 dodge ram 1500.?when you drain that one you have to lower the pan to one side or it will run all over the place,once its all drained out clean off all the old gasket and let it set for as long as you can so it will drain real good and wipe down all of the insides of the transmission that you can with a few old rags,then using a new gasket or form a gasket which works just as good put it in place and torque all the bolts down evenly not real tight at first just snug them and go back over them and snug all them up,and let it set for a few minute before adding fluid to it,if not it may leak on you,and make sure before you put the pan on that you straiten the pan up where the old bolts have drawn it up and caused small indents where the bolt go this will help assure it gets a good tight seal again,once all this is done refill it and start it and let it idle and proceed to fill it to the full mark when it reaches operating temperature,and check for leaks,its a simple job but time consuming,good luck with it.Is it tough to change the tranny fluid on a 2002 dodge ram 1500.?its not real hard, similar to oil. drain it and put fresh in, make sure you get the right weight( ask the auto store)Is it tough to change the tranny fluid on a 2002 dodge ram 1500.?Basically, the difference is you have to take the tranny pan off and clean up the gasket off the pan and tranny with (I use) a wire wheel on my drill and spray everything with electrical parts cleaner then wipe a couple times with a rag making sure you didn't leave anything behind. Then pull the filter out, they usually just push in to place. Then it depends on the gasket whether or not you use a sealer but I prefer the high tack adhesive because i've never had a leak with it. It pretty much works like rubber cement, but better. You just apply a really thin layer on both sides and let it dry then stick it making real sure the bolt holes are lined up by starting a couple bolts in the pan then putting in the rest. Just a little more than snug the bolts up after you have them all put back in making sure to not squeeze the gasket out cracking it.Is it tough to change the tranny fluid on a 2002 dodge ram 1500.?I think it would be more cost effective and convenient to have the transmission flushed instead of just changing the oil in the pan. You would only be replacing half the fluid just by dropping the pan. A tranmission fluid flush would replace 99% of the fluids. Best of luck.
How much would it cost to replace engine in 2004 mazda6 S?
I had a detonation and a hole was torched through a piston, changing the engine is the best way to fix it from what I've read.How much would it cost to replace engine in 2004 mazda6 S?source a used engine either locally from a yard or off of ebay and then call around to mechanics and ask how much to toss it in is going to cost.How much would it cost to replace engine in 2004 mazda6 S?It's going to cost anywhere from 1500.00 to 3000.00 depending on who you have do it, the cost of the motor, If it's new or used
Once how many days or how many kilometers i have to chage the engine oil?
my bike is hero honda Splendor plus please tell me once how many kilometers i need to change the engine oil for my bikeOnce how many days or how many kilometers i have to chage the engine oil?Change it after every 5000kms.Once how many days or how many kilometers i have to chage the engine oil?Don't run it more than about 4000 miles or 6437.3 kilometers between changes.Once how many days or how many kilometers i have to chage the engine oil?every 3,000 miles or 90 days (3 months)Once how many days or how many kilometers i have to chage the engine oil?5000 kmOnce how many days or how many kilometers i have to chage the engine oil?Its a small engine, I would change it every 2000 milesOnce how many days or how many kilometers i have to chage the engine oil?3000 miles for cars. Not sure about bikes.
4828.032 km
4828.032 km
How much does it cost to change your cars engine so it takes vegitable oil?
Changing engines (if you don't have a diesel now) is very problematic. Sure you can change out your engine, but if you live in one of the smog Nazi states (CA, HI, etc) it will be pretty difficult to pass smog inspection next time around. I'm not saying you can't get alternative fuel waivers, but it's far from simple.
If you live in a state without mandatory inspections things get a lot more reasonable. I'd expect you could do the swap for under 2K with a RWD vehicle. Then again, once biodiesel becomes a real economy don't expect free fry oil anymore.How much does it cost to change your cars engine so it takes vegitable oil?i think all diesels run on it normally. Myth Busters did a episode
i found it on youtube http://youtube.com/watch?v=QEX1YFXYTdI
although i dont know how good it really is for your motor you'll have to look it upHow much does it cost to change your cars engine so it takes vegitable oil?First of all you need to have a diesel for the platform. Then you need to go to grease car .com and find out what kit you will need . I will tell you , at the price of gas, I'm going to do it to . I believe that it will cost about 3,500.-- But you'll save that in fuel in less than 1 yr. and I believe that you might get a 5,000. -- tax credit for having a conversion vehicle.How much does it cost to change your cars engine so it takes vegitable oil?i dont know my parentrs wont let me drive tell i'm 18.
sorryHow much does it cost to change your cars engine so it takes vegitable oil?Not practical if your car runs on gasoline. Diesel engines are much heavier to stand the heat.How much does it cost to change your cars engine so it takes vegitable oil?A small fortune. You need a new engine.layouts for myspace drawing a circle
If you live in a state without mandatory inspections things get a lot more reasonable. I'd expect you could do the swap for under 2K with a RWD vehicle. Then again, once biodiesel becomes a real economy don't expect free fry oil anymore.How much does it cost to change your cars engine so it takes vegitable oil?i think all diesels run on it normally. Myth Busters did a episode
i found it on youtube http://youtube.com/watch?v=QEX1YFXYTdI
although i dont know how good it really is for your motor you'll have to look it upHow much does it cost to change your cars engine so it takes vegitable oil?First of all you need to have a diesel for the platform. Then you need to go to grease car .com and find out what kit you will need . I will tell you , at the price of gas, I'm going to do it to . I believe that it will cost about 3,500.-- But you'll save that in fuel in less than 1 yr. and I believe that you might get a 5,000. -- tax credit for having a conversion vehicle.How much does it cost to change your cars engine so it takes vegitable oil?i dont know my parentrs wont let me drive tell i'm 18.
sorryHow much does it cost to change your cars engine so it takes vegitable oil?Not practical if your car runs on gasoline. Diesel engines are much heavier to stand the heat.How much does it cost to change your cars engine so it takes vegitable oil?A small fortune. You need a new engine.
Thursday, September 22, 2011
Bike engined go kart - what can be used?
Am already planning to build Tiger Super Six kit car over the winter, but fancied something to build over the summer and have some fun with.
So my question is - what is the most adventurous bike engine you could feasibly fit onto a go-kart type chasis without breaking the bank? Has anyone built for example with a Ninja engine? If so how have you arranged eg clutch/gear change/engine mounting-orientation in respect of gear change?
I know that may sound ridiculous but this would be for fun not for entering a league to race with and thus obsense power sounds good to me... altho i do worry how it would go round corners
any thoughts appreciated
cheers
daveBike engined go kart - what can be used?Any yamaha Engine should work, how fast you want'n to go?? Blaster engines are on ebay from 120-$250. Banshee engine would be good too (highest recomendation for a good engine)
Qn_dvd@yahoo.comBike engined go kart - what can be used?Sorry,no real answer.......but if you build it, can I take it for a ride???:)
So my question is - what is the most adventurous bike engine you could feasibly fit onto a go-kart type chasis without breaking the bank? Has anyone built for example with a Ninja engine? If so how have you arranged eg clutch/gear change/engine mounting-orientation in respect of gear change?
I know that may sound ridiculous but this would be for fun not for entering a league to race with and thus obsense power sounds good to me... altho i do worry how it would go round corners
any thoughts appreciated
cheers
daveBike engined go kart - what can be used?Any yamaha Engine should work, how fast you want'n to go?? Blaster engines are on ebay from 120-$250. Banshee engine would be good too (highest recomendation for a good engine)
Qn_dvd@yahoo.comBike engined go kart - what can be used?Sorry,no real answer.......but if you build it, can I take it for a ride???:)
When getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?
The oil is very clear, even close to looking like water.When getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?ask your mechanic, or look on your service reciept. If you are concerned about the water like look and you think he used cheap oil, buy what you feel is the correct oil, and have him change it. when you get an oil change, it is best to read your manual for recommended grade, or some cars have the grade recommended on the fill cap.When getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?there are a lot of types of oils used incars. easiest way is to ask himWhen getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?you have to ask the mechanic.
if you're particular, you can bring in you own oil and/or filter and they'll will just charge you for the labor and whatnot(disposal fee, if applied)When getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?They usually put a sticker in the window on the driver's side if you live in the USA. This gives you the brand of oil, the last time it was changed and the next interval time to change the oil again. Or just ask.When getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?ask him!!!!When getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?Send him a coded message then it will be a secret just between you two.
You could ring and ask or look on the bill to see if he has specified the oil
There might be a lable stuck some where in the engine compartment or door pillar, goandavaluk.When getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?You do have a mouth ? ask them what kind of oil did you used to put in my carWhen getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?call the mechanic that did the work and ask him.
if you're particular, you can bring in you own oil and/or filter and they'll will just charge you for the labor and whatnot(disposal fee, if applied)When getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?They usually put a sticker in the window on the driver's side if you live in the USA. This gives you the brand of oil, the last time it was changed and the next interval time to change the oil again. Or just ask.When getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?ask him!!!!When getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?Send him a coded message then it will be a secret just between you two.
You could ring and ask or look on the bill to see if he has specified the oil
There might be a lable stuck some where in the engine compartment or door pillar, goandavaluk.When getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?You do have a mouth ? ask them what kind of oil did you used to put in my carWhen getting my car repaired, the mechanic changed the engine oil. How do i find out what oil he used?call the mechanic that did the work and ask him.
How do i get my 1997 2.2 s10 to quit cutting off at 90 mph?
i dont wnat to change engines because my truck is bagged so that might be a problem if i do (air ride problem).How do i get my 1997 2.2 s10 to quit cutting off at 90 mph?its called a govener and you have to have a programmer to turn it off
How do I change the internet engine my MSN messenger uses?
I use MSN messenger (Windows Live Messenger) and sometimes I will have an email. When I am linked directly to my hotmail account, it always ALWAYS always opens up with Internet Explorer... and I hate Internet Explorer. How can I change this setting (from Internet Explorer to Firefox)? I've looked in Preferences and Options, but I haven't found anything. Help!How do I change the internet engine my MSN messenger uses?I agree and I sympathize...Are you kidding ? Remember, in MSN there is... Microsoft...
Ok, I found the solution in the above link (in French..). You need 2 plugins, Messenger Plus and Stuffplug.
Messenger Plus:
http://www.zdnet.fr/telecharger/windows/
Install it (BE SURE NOT to accept the sponsors in the second screen : %26quot;I refuse to give my support%26quot;).
Install the plugin %26quot;Stuffplug%26quot;.
http://www.generation-nt.com/telecharger
Now go to the Stuffplug options, you can choose %26quot;open all links in the default navigator%26quot;. If you selected Firefox as the default, it will do what you want.
:-)
Ok, I found the solution in the above link (in French..). You need 2 plugins, Messenger Plus and Stuffplug.
Messenger Plus:
http://www.zdnet.fr/telecharger/windows/
Install it (BE SURE NOT to accept the sponsors in the second screen : %26quot;I refuse to give my support%26quot;).
Install the plugin %26quot;Stuffplug%26quot;.
http://www.generation-nt.com/telecharger
Now go to the Stuffplug options, you can choose %26quot;open all links in the default navigator%26quot;. If you selected Firefox as the default, it will do what you want.
:-)
What is another way to stop a leak other than changing the engine seal or using the liquid that seal the leak?
I added the stop leak liquid about 3 weeks ago and the cars is still leaking oil. How long do i wait to add another quart of the stop leak liquid?What is another way to stop a leak other than changing the engine seal or using the liquid that seal the leak?No Need to wait, put another in. It will likely not stop leaking, and the only fix is to change the seal or gasket.What is another way to stop a leak other than changing the engine seal or using the liquid that seal the leak?find out where the leak is coming from most likely sumthing like that oil pan if so just replace the oil pan gasketWhat is another way to stop a leak other than changing the engine seal or using the liquid that seal the leak?If a seal is leaking it has to be replaced. If a gasket is leaking it has to be replaced. The medicine didn't work. Surgery is indicated. There goes your weekend. Good luck.What is another way to stop a leak other than changing the engine seal or using the liquid that seal the leak?it may not be a leaking seal.the additive works with seals only.
so look for other possibilities like leaking oil pan gaskets,oil pan punctures, valve cover %26amp; timing gaskets.cheers!transfer file density of virgin coconut oil
so look for other possibilities like leaking oil pan gaskets,oil pan punctures, valve cover %26amp; timing gaskets.cheers!
How can you change your search engine?
I have Mozilla Firefox and every time i go up to the search bar (the one with the URL in it..i don't know it that's called a search bar or what.) and try to type something in it goes to mywebsearch. Can i change that?How can you change your search engine?You need to uninstall that from your programs and run a malware scan with this:
http://malwarebytes.org/
I also hope you aren't using Zwinky, then you have a whole other load of problems too.
EDIT: Whoever gave me the thumbs down, MyWebSearch is a malicious toolbar and needs to be uninstalled as soon as possible. It is well known for putting spyware on your computer. Same with Zwinky.How can you change your search engine?it is going to mywebsearch because the URL you are typing in is not working and the web cant find it... try searching with yahoo or google and type in a search word not a web address and you should be able to find what you are looking for
http://malwarebytes.org/
I also hope you aren't using Zwinky, then you have a whole other load of problems too.
EDIT: Whoever gave me the thumbs down, MyWebSearch is a malicious toolbar and needs to be uninstalled as soon as possible. It is well known for putting spyware on your computer. Same with Zwinky.How can you change your search engine?it is going to mywebsearch because the URL you are typing in is not working and the web cant find it... try searching with yahoo or google and type in a search word not a web address and you should be able to find what you are looking for
How to change your search engine?
I have the yahoo toolbar which I want to keep, but is there a way to switch the search engine to google? thanksHow to change your search engine?You can always get the Google toolbar also, but other than that I have no clue. How to change your search engine?1. Type about:config in th address bar and press Enter
2. Type keyword in Filter textbox and you will see only the preference keyword.URL.
3. Double-click on keyword.URL and change the value to: http://www.google.com/search?q=
Note: You can use this to change to any search engine for keywor
2. Type keyword in Filter textbox and you will see only the preference keyword.URL.
3. Double-click on keyword.URL and change the value to: http://www.google.com/search?q=
Note: You can use this to change to any search engine for keywor
Report Abuse
How can I change my search engine from aim to google at top right corner of explorer.. thanks?
I use yahoo home page at the top corner of internet explorer page is a search place and it says aim...I want google..can you help me change that..thanks marilynHow can I change my search engine from aim to google at top right corner of explorer.. thanks?LOL, Marilyn I am TOTALLY in the same boat as you. I miss my google search bar : (How can I change my search engine from aim to google at top right corner of explorer.. thanks?in front of the search box which you type your search string, is a button with a magnifier icon in it and right after that, there's an down arrow, if you press on the down arrow, a drop down list will open and the last item in it is %26quot;Change Search Defaults%26quot;
if you click on it, a window will open and in it, you can select google and then press the %26quot;Set Default%26quot; button.
That's it. now you can search with google.
if you click on it, a window will open and in it, you can select google and then press the %26quot;Set Default%26quot; button.
That's it. now you can search with google.
How do I change my search engine?
Ok so apparently, I downloaded something onto my computer to change my browser from Google to Ask. I HATE Ask.com. Google is better than Ask D:!
I've been trying everything to change my search engine. Is it a simple process?
:C Any idead on how to change the search engine from Ask.com to Google.com?How do I change my search engine?go to google homepage and you will see the button Make Homepage. Alternatively you can go to file then Internet properties and change it there.How do I change my search engine?There are 2 places it could have changed, your actual home page, or it could have installed a tool bar.
To change the hompage, you can go to tools, internet options and type your homepage in right there.(http://google.com)
if its a tool bar, you would right click a blank spot at the top of your browser, and dis-select the ask tool bar and select the google one.
Message me if you need more help!
I've been trying everything to change my search engine. Is it a simple process?
:C Any idead on how to change the search engine from Ask.com to Google.com?How do I change my search engine?go to google homepage and you will see the button Make Homepage. Alternatively you can go to file then Internet properties and change it there.How do I change my search engine?There are 2 places it could have changed, your actual home page, or it could have installed a tool bar.
To change the hompage, you can go to tools, internet options and type your homepage in right there.(http://google.com)
if its a tool bar, you would right click a blank spot at the top of your browser, and dis-select the ask tool bar and select the google one.
Message me if you need more help!
How much would it cost to change the engine in my 2006 bmw 325I?
I have a little side cash and wanted to see if I could take the 215 hp engine and add something around 350-400 hp. How much would it cost approximately, including labor?How much would it cost to change the engine in my 2006 bmw 325I?about $8,000.00 and that includes the price of a good used engine.How much would it cost to change the engine in my 2006 bmw 325I?$10,000How much would it cost to change the engine in my 2006 bmw 325I?You could always replace it with the 333hp E46 M3 S54 engine, they cost around $6000 used for a low-mileage engine, and would end up costing upwards of $10,000 for engine+labor.
We replaced the Engine on our 2005 Audi A4 with an RS4 engine, and it ended up costing over $11,000.How much would it cost to change the engine in my 2006 bmw 325I?I'd look for a wrecked (hit in the rear or side) turbo 335i which would give you 300HP to start with and then do some mods that could easily increase the power to 350 or more. Dinan and other have relatively inexpensive mods such as cold air intake and chips that can bring the horsepower to the 350 mark with relative ease and cost effectiveness. I'd agree that the cost with labor will still be in the area of $7-10K. YOu could also look for an M3 engine that would put you at the 400 HP mark fasterbutt the transition would be more difficult as it's not going to be a drop in deal either.
If it were my money, which it's not, I'd think of trading the 2006 for a newer model and investing the money into the higher horsepower model already put together with some sort of warranty perhaps.
Good luck.baby girl names best server
We replaced the Engine on our 2005 Audi A4 with an RS4 engine, and it ended up costing over $11,000.How much would it cost to change the engine in my 2006 bmw 325I?I'd look for a wrecked (hit in the rear or side) turbo 335i which would give you 300HP to start with and then do some mods that could easily increase the power to 350 or more. Dinan and other have relatively inexpensive mods such as cold air intake and chips that can bring the horsepower to the 350 mark with relative ease and cost effectiveness. I'd agree that the cost with labor will still be in the area of $7-10K. YOu could also look for an M3 engine that would put you at the 400 HP mark fasterbutt the transition would be more difficult as it's not going to be a drop in deal either.
If it were my money, which it's not, I'd think of trading the 2006 for a newer model and investing the money into the higher horsepower model already put together with some sort of warranty perhaps.
Good luck.
Is it my imagination or do many people not know how to use the search engine?
Sometimes I will mention to someone that they can find something on the computer.
They ask for the exact URL and they are unable to look it up for themselves.
Some thing are .com some .org and of course there are others at there but....
I have found that if you ask the computer for what you want in a search engine, it will give it to you...and you can also change search engines if you cannot find it...there is google, yahoo and others.
Has anyone else noticed, that not everyone seems to know how to use a search engine?Is it my imagination or do many people not know how to use the search engine?You betcha. There are many people out there that don't know what 'key' words to put into the search engine to find what they are looking for. Personally, I usually don't have any trouble finding what I'm looking for when I'm on my browser. Maybe some of us are just more computer literate than some of the other people because we spend more time on our computers than those that try to use the various search engines only for special projects, people who are ignorant or don't have a clue as to how to use a search engine. And yet they manage to find their way to Yahoo Answers! Strange, isn't it?Is it my imagination or do many people not know how to use the search engine?Yes, some are not aware of it.
That's why we are here to answer.Is it my imagination or do many people not know how to use the search engine?Spend any time on Yahoo Answers, and this becomes very obvious. I would say as many as 50% of the questions asked in some categories are ones that could be answered in less time by just typing the question into a Google search.
It's one thing if someone is asking a specific question - like about a video released date - and they don't know the available resources. But people who ask general question drive me up the walls. Then again, half the kids asking questions here would probably have a hard time finding an answer since they can't use proper grammar.Is it my imagination or do many people not know how to use the search engine?I've noticed that here.. many people will wait for days, even weeks for answers here when it should have taken them less than 5 mins on google or wikipedia...Is it my imagination or do many people not know how to use the search engine?Well , there are many who don't know how to use a computer. So , what's the problem , if some peaple don't know how to use a search engine?Is it my imagination or do many people not know how to use the search engine?I can use a search engine but I enjoy getting answers from real people sometimes you get a better answer, or a different angleIs it my imagination or do many people not know how to use the search engine?Absolutely! A lot of people know what Google is, but beyond that, they have little concept of what a s/e is or does.
If you really want to confuse them... drop the term 'metasearch engine%26quot; on them! I've showed a lot of students in my IT classes what dogpile.com does... you should see their facial expressions.
One nice thing about Firefox and Internet Explorer is that if you enter a non-url, it will auto search the web. In a way, it kinda 'idiot proofs' searching the internet.Is it my imagination or do many people not know how to use the search engine?Yes.Is it my imagination or do many people not know how to use the search engine?i dont know..but then im stupid...i know nothing about computers....its all new to me....im self taught so that would make me the worst teacher in the world....i cant spell...i am losing the will to live...i have good reason to end it all....but ile keep going for a while longer...cos out there,..i know somone loves me......joke people......i was kidding about the last part..........cheers ....seamanabIs it my imagination or do many people not know how to use the search engine?Ok...I do know how to type in things on google that I have an interest in. However, when I am asking a question about something and I ask for a link, the weird thing is someone else ALWAYS gives me a better website than the ones I found on my own by googling it. So, even though I can find answers on my own...it never hurts for me to ask for others to give their websites either because you often find out a better site to explore.
They ask for the exact URL and they are unable to look it up for themselves.
Some thing are .com some .org and of course there are others at there but....
I have found that if you ask the computer for what you want in a search engine, it will give it to you...and you can also change search engines if you cannot find it...there is google, yahoo and others.
Has anyone else noticed, that not everyone seems to know how to use a search engine?Is it my imagination or do many people not know how to use the search engine?You betcha. There are many people out there that don't know what 'key' words to put into the search engine to find what they are looking for. Personally, I usually don't have any trouble finding what I'm looking for when I'm on my browser. Maybe some of us are just more computer literate than some of the other people because we spend more time on our computers than those that try to use the various search engines only for special projects, people who are ignorant or don't have a clue as to how to use a search engine. And yet they manage to find their way to Yahoo Answers! Strange, isn't it?Is it my imagination or do many people not know how to use the search engine?Yes, some are not aware of it.
That's why we are here to answer.Is it my imagination or do many people not know how to use the search engine?Spend any time on Yahoo Answers, and this becomes very obvious. I would say as many as 50% of the questions asked in some categories are ones that could be answered in less time by just typing the question into a Google search.
It's one thing if someone is asking a specific question - like about a video released date - and they don't know the available resources. But people who ask general question drive me up the walls. Then again, half the kids asking questions here would probably have a hard time finding an answer since they can't use proper grammar.Is it my imagination or do many people not know how to use the search engine?I've noticed that here.. many people will wait for days, even weeks for answers here when it should have taken them less than 5 mins on google or wikipedia...Is it my imagination or do many people not know how to use the search engine?Well , there are many who don't know how to use a computer. So , what's the problem , if some peaple don't know how to use a search engine?Is it my imagination or do many people not know how to use the search engine?I can use a search engine but I enjoy getting answers from real people sometimes you get a better answer, or a different angleIs it my imagination or do many people not know how to use the search engine?Absolutely! A lot of people know what Google is, but beyond that, they have little concept of what a s/e is or does.
If you really want to confuse them... drop the term 'metasearch engine%26quot; on them! I've showed a lot of students in my IT classes what dogpile.com does... you should see their facial expressions.
One nice thing about Firefox and Internet Explorer is that if you enter a non-url, it will auto search the web. In a way, it kinda 'idiot proofs' searching the internet.Is it my imagination or do many people not know how to use the search engine?Yes.Is it my imagination or do many people not know how to use the search engine?i dont know..but then im stupid...i know nothing about computers....its all new to me....im self taught so that would make me the worst teacher in the world....i cant spell...i am losing the will to live...i have good reason to end it all....but ile keep going for a while longer...cos out there,..i know somone loves me......joke people......i was kidding about the last part..........cheers ....seamanabIs it my imagination or do many people not know how to use the search engine?Ok...I do know how to type in things on google that I have an interest in. However, when I am asking a question about something and I ask for a link, the weird thing is someone else ALWAYS gives me a better website than the ones I found on my own by googling it. So, even though I can find answers on my own...it never hurts for me to ask for others to give their websites either because you often find out a better site to explore.
How much should it cost to change the diesel engine in a vw rabbit for a newer or rebuilt one?
where can you buy these engines? how much do they cost? and whats the labor?How much should it cost to change the diesel engine in a vw rabbit for a newer or rebuilt one?If you can't do the work yourself, you're talking a couple grand easy just to replace it with what was in the car originally, to update the engine, probably 5-6 thousand.How much should it cost to change the diesel engine in a vw rabbit for a newer or rebuilt one?There are companies that will sell rebuilt engines and shops that will install them; the best is to find a shop that has the engine and will install for you; look online or your local paperHow much should it cost to change the diesel engine in a vw rabbit for a newer or rebuilt one?Lots.How much should it cost to change the diesel engine in a vw rabbit for a newer or rebuilt one?Total with parts and labor- $2300-2800.How much should it cost to change the diesel engine in a vw rabbit for a newer or rebuilt one?I would just look on ebay, maybe do a search for %26quot;turbo diesel or TDI. It would basically bolt in, but I just don't know about if you need a computer to run the turbo or not. I have two smoker VW pickups I love, but they do lack serious power, but a BIG exhaust helps out a lot!
Hi there, I have a nissan CA20 engine and I need more HP from it, can I put a turbo on it without damaging it?
I really dont want to change the engine because it's too much expence and truble and work. the engine is about 80hp but I need a bit more. if i can put a small turbo on it, how much more power could I get. Thank you.Hi there, I have a nissan CA20 engine and I need more HP from it, can I put a turbo on it without damaging it?HI
Have you priced turbo's and installation cost $$$$$ its not as cheap as you might think.
if you just want a little more HP then go with a cool air intake and a header those would be the best bang for the cheap buck.
good luck
timHi there, I have a nissan CA20 engine and I need more HP from it, can I put a turbo on it without damaging it?you can turbo it but will need to put in a turbo cam, seperate fuel system, and ignition control... prob better to find a turbo motor and swap it all out to save ya some cash
Have you priced turbo's and installation cost $$$$$ its not as cheap as you might think.
if you just want a little more HP then go with a cool air intake and a header those would be the best bang for the cheap buck.
good luck
timHi there, I have a nissan CA20 engine and I need more HP from it, can I put a turbo on it without damaging it?you can turbo it but will need to put in a turbo cam, seperate fuel system, and ignition control... prob better to find a turbo motor and swap it all out to save ya some cash
I have a 1986 Mustang lx with a 3.8 i want to change the engine to a 4.6 or 5.0 how much trouble will this be?
You will also need V8 front springs, transmission, driveshaft, 8.8 rear, and if you go EFI, ALL of the elecronics and fuel system. If you can't find a wrecked LX or GT for a donor car, just go buy one.
4.6L conversions are becoming pretty popular, but again, you're going to need more than just the motorI have a 1986 Mustang lx with a 3.8 i want to change the engine to a 4.6 or 5.0 how much trouble will this be?Alot for the 4.6 the wiring is very different. Its best to go the 5.0 route its cheaper and u can make more power. Its not too much trouble many shops and many magazines have covered this swap many times.I have a 1986 Mustang lx with a 3.8 i want to change the engine to a 4.6 or 5.0 how much trouble will this be?Very easy to do a 5.0 swap =) just read into it you can get a used 5.0 engine for about $500
%26lt;-------- 1986 Mustang GT Owner
4.6L conversions are becoming pretty popular, but again, you're going to need more than just the motorI have a 1986 Mustang lx with a 3.8 i want to change the engine to a 4.6 or 5.0 how much trouble will this be?Alot for the 4.6 the wiring is very different. Its best to go the 5.0 route its cheaper and u can make more power. Its not too much trouble many shops and many magazines have covered this swap many times.I have a 1986 Mustang lx with a 3.8 i want to change the engine to a 4.6 or 5.0 how much trouble will this be?Very easy to do a 5.0 swap =) just read into it you can get a used 5.0 engine for about $500
%26lt;-------- 1986 Mustang GT Owner
How can I make my Straight Six engine stronger?
I have a 1967 Mustang Coupe, automatic transmission. It has a pathetic Inline 6 in it that hardly gives it any power. Is there any way to modify it at all to make it stronger without changing the engine?How can I make my Straight Six engine stronger?I have a (European) car with [pathetic?] in-line 6 cyl (3.2 litre) engine, the power output is 340BHP...
I know of 2.5 litre V6 (not much different from in-line 6 cyl) with 1000BHP...How can I make my Straight Six engine stronger?The 351/400M is a 2 bolt main design engine....horrible for building power...If you have the 200ci engine that was offered in those cars, you could swap the head with one from a 1976 250ci inline 6, and add a Clifford intake that will allow you to swap to a 2bbl. carb, instead of the single that it came with. Add a header, swap out the three speed tranny for a five, and you should be able to get around 300 hp out of it. If you have anything smaller than the 200 6, swap it for a 302, or a 351 cleveland, and a t6 tranny, and start your build there.How can I make my Straight Six engine stronger?It will feel a lot stronger with drag race gears in the rear end, it should be 3.20:1 stock, you need some 3.5 or 3.73's, a 8.8 from a 90's Mustang is the way to go..
also check out http://www.cliffordperformance.com for high performance parts for your 6..
http://autos.groups.yahoo.com/group/6cylHow can I make my Straight Six engine stronger?Modify it to a hybrid or a 351/400M.improve my well being reduce or control it
I know of 2.5 litre V6 (not much different from in-line 6 cyl) with 1000BHP...How can I make my Straight Six engine stronger?The 351/400M is a 2 bolt main design engine....horrible for building power...If you have the 200ci engine that was offered in those cars, you could swap the head with one from a 1976 250ci inline 6, and add a Clifford intake that will allow you to swap to a 2bbl. carb, instead of the single that it came with. Add a header, swap out the three speed tranny for a five, and you should be able to get around 300 hp out of it. If you have anything smaller than the 200 6, swap it for a 302, or a 351 cleveland, and a t6 tranny, and start your build there.How can I make my Straight Six engine stronger?It will feel a lot stronger with drag race gears in the rear end, it should be 3.20:1 stock, you need some 3.5 or 3.73's, a 8.8 from a 90's Mustang is the way to go..
also check out http://www.cliffordperformance.com for high performance parts for your 6..
http://autos.groups.yahoo.com/group/6cylHow can I make my Straight Six engine stronger?Modify it to a hybrid or a 351/400M.
Subscribe to:
Posts
(Atom)