Keep the 351c and do the work on that engine. You won't
be disappointed!How much will it cost me to change the engine of my clevland 351 2v in my 1970 mustang.?you don't say how of the work your can do yourself and what parts you will need...
A shop will charge you around $500 to remove and replace the same engine plus any repairs...
While the 351C is a rare engine, it can be built into a very good performer. parts are out there, even complete engines, I know, I have one. It's said the 2v heads are even better on the street than the 4v, but you will need a 4v manifold... or you can go with a 351 W with ported heads and the works... lots of choices...How much will it cost me to change the engine of my clevland 351 2v in my 1970 mustang.?how much does the new engine cost?
how much can you get for your current engine?
subtract the second answer from the first, that's how much it will cost...
Monday, September 19, 2011
How to change the search engine for mozilla firefox?
How do i change the search engine for mozilla firefox?
It changed my search engine and now i dont get the results i want.
How do i change it back to google?How to change the search engine for mozilla firefox?If you want to use Google as your default browser, you can install google toolbar (toolbar.google.com). when it recommends you to choose google as your web browser, agree with it.
for Yahoo, you can install Yahoo toolbar. The process is the same as google toolbar (except the address :toolbar.yahoo.com )
Good LuckWhere I can find nice modern comforters ever share a bath
It changed my search engine and now i dont get the results i want.
How do i change it back to google?How to change the search engine for mozilla firefox?If you want to use Google as your default browser, you can install google toolbar (toolbar.google.com). when it recommends you to choose google as your web browser, agree with it.
for Yahoo, you can install Yahoo toolbar. The process is the same as google toolbar (except the address :toolbar.yahoo.com )
Good Luck
I want to change the engine oil and gear box oil to Harley Davidson softail 1340cc 1999?
i would like to know the amounts of oil to be used to service the engine and gearbox to harley davidson softail 1340cc 1999
also how do i measure the level of the oil hot or cold and to what level any other advice is most welcomeI want to change the engine oil and gear box oil to Harley Davidson softail 1340cc 1999?Rider is correct. You should buy a service manual. Your Softail holds 3 quarts of oil, the transmission holds 20- 24oz and the primary holds 1 quart. To check the engine oil, warm up engine ( a 5 minute ride will do), hold bike upright and level, push in dipstick all of the way then pull it out and check level. Trans can be cold, have a friend hold bike upright, set dipstick on the threads, remove to check. Between marks on both sticks is good. Hope this helps.I want to change the engine oil and gear box oil to Harley Davidson softail 1340cc 1999?Go to the Harley Davidson Riders Club GB website. Join the forum and ask the question there. Make sure you ask in the right forum though. (Modern Era - Evolution, TC88 %26amp; TC96)?? 100% Guaranteed it will be answered quickly and correctly! Link below to cut %26amp; paste. Good luck.
http://www.harley-davidson-hangout.com/fI want to change the engine oil and gear box oil to Harley Davidson softail 1340cc 1999?Hey Scarface, the best thing you can buy is a manual to support your service needs!
The info provided in the manual will not only help you but it will give you a better understanding of you bike and will save you a lot on service costs if you have a methodical approach to mechanics and a few tools lying around.
Oil wise, warm your engine up so the the oil will drain from your engine faster and more efficiently.
It's more advisable than doing it cold!
It doesn't have to be red hot though!
If you have your manual it should tell you how much oil you require with a new filter! Always advisable! A filter that is!
Have fun and save some money,
Troy.I want to change the engine oil and gear box oil to Harley Davidson softail 1340cc 1999?I've got a Massey Ferguson tractor owner's manual you could have. I'm sure they're pretty similar?
also how do i measure the level of the oil hot or cold and to what level any other advice is most welcomeI want to change the engine oil and gear box oil to Harley Davidson softail 1340cc 1999?Rider is correct. You should buy a service manual. Your Softail holds 3 quarts of oil, the transmission holds 20- 24oz and the primary holds 1 quart. To check the engine oil, warm up engine ( a 5 minute ride will do), hold bike upright and level, push in dipstick all of the way then pull it out and check level. Trans can be cold, have a friend hold bike upright, set dipstick on the threads, remove to check. Between marks on both sticks is good. Hope this helps.I want to change the engine oil and gear box oil to Harley Davidson softail 1340cc 1999?Go to the Harley Davidson Riders Club GB website. Join the forum and ask the question there. Make sure you ask in the right forum though. (Modern Era - Evolution, TC88 %26amp; TC96)?? 100% Guaranteed it will be answered quickly and correctly! Link below to cut %26amp; paste. Good luck.
http://www.harley-davidson-hangout.com/fI want to change the engine oil and gear box oil to Harley Davidson softail 1340cc 1999?Hey Scarface, the best thing you can buy is a manual to support your service needs!
The info provided in the manual will not only help you but it will give you a better understanding of you bike and will save you a lot on service costs if you have a methodical approach to mechanics and a few tools lying around.
Oil wise, warm your engine up so the the oil will drain from your engine faster and more efficiently.
It's more advisable than doing it cold!
It doesn't have to be red hot though!
If you have your manual it should tell you how much oil you require with a new filter! Always advisable! A filter that is!
Have fun and save some money,
Troy.I want to change the engine oil and gear box oil to Harley Davidson softail 1340cc 1999?I've got a Massey Ferguson tractor owner's manual you could have. I'm sure they're pretty similar?
How to change default search engine from Yahoo to Google?
I realize it's a kind of ironic I'm asking this on Yahoo Answers, but i prefer google search. I've gone to Internet Options, search settings, deleted Yahoo, and set google as my default, but yahoo keeps popping up as my default search engine, and after I do a search, Yahoo pops up again on the list, but google is still the default, yet it keeps using Yahoo, any ideas on how to change it so it works?How to change default search engine from Yahoo to Google?This link had detailed instructions on how to make Google your default browser, and to keep other browsers from coming up:
http://www.google.com/options/defaults.h
Good luck!
How to change default search engine from Yahoo to Google?1. Type about:config in th address bar and press Enter
2. Type keyword in Filter textbox and you will see only the preference keyword.URL.
3. Double-click on keyword.URL and change the value to: http://www.google.com/search?q=
http://www.google.com/options/defaults.h
Good luck!
How to change default search engine from Yahoo to Google?1. Type about:config in th address bar and press Enter
2. Type keyword in Filter textbox and you will see only the preference keyword.URL.
3. Double-click on keyword.URL and change the value to: http://www.google.com/search?q=
Report Abuse
How to change default search engine from Yahoo to Google?if you have a search bar on your browser, you should be able to click on the drop arrow next to the symbol for that browser and click on 'manage search engines.' try changing the default there.
Anyone knows about engine oil tank plug stripped?
I went to change my engine oil yesterday. They told me the plug of my engine oil tank is stripped and they cannot release the old oil. Also the engine oil pressure on the pane is pretty low although the oil is full. Anyone knows what is the problem and how much it would cost to repair it? I don't have time to ask a garage and want to have a general idea of it before I go to a garage.
Thank you very much!Anyone knows about engine oil tank plug stripped?drill out the old plug using a left hand drill and an ez out.
they make replacement oversize plugs just for this situation.
need details on the car to answer the low pressire issue. what is mileage, make, model, etc.Anyone knows about engine oil tank plug stripped?i take it that you went to the equivelant of walmart or some tard place to get oil changed and they refuse to do it because the pan plug is stripped..
this can be repaired by using a heli coil insert or retapping the pan plug hole worst case get a junkyard pan and replace the old one as far as oil pressure goes if your sure its low i would have a shop flush and clean the engine if its older and high miles other than that next time list the make model and yearAnyone knows about engine oil tank plug stripped?well you can buy every thing you need to do the job your self for about what they are going to charge you really and not a hard thin gto fix.. you take a screwdriver and pry a bit on the plug while you try and remove with the right tool....most of the time it wil come on out .. then you get another drain plug... many of thses quick lube places are not willing to work on cars so you can find another shop a real place to change your oil and do work not walmarts or jiffy lube places are place you dont want to go too any timeAnyone knows about engine oil tank plug stripped?I'll actually answer your question... one didnt you ask about the plug not the pan? retards cant read. Answer-Vise Grips, channel locks, needle nose... buy a new plug ruffly 12-18 dollars. take it back to where you went say get that old one out and put this one in. Oil pressure will be greatly affected by the oil filter which is usually replaced with an oil change... after new oil and filter is installed.... and you still have less than 25 psi at idle, your pump may need restoration or replacementAnyone knows about engine oil tank plug stripped?Go to your auto parts store and tell them that your oil plug is stripped. The will show you a repair kit (oversized plug).
But if the HEAD is stripped, then you need one of these:
http://www.sears.com/shc/s/p_10153_12605
===
As for the low oil pressure... you probably need new oil pump.
Good Luck....Anyone knows about engine oil tank plug stripped?If it's the head of the plug, a nut can be welded on the top of it to get it out. Any shop with a lift and a welder can do this. Just get a new plug before you go so they don't try and charge you too much for one.
Thank you very much!Anyone knows about engine oil tank plug stripped?drill out the old plug using a left hand drill and an ez out.
they make replacement oversize plugs just for this situation.
need details on the car to answer the low pressire issue. what is mileage, make, model, etc.Anyone knows about engine oil tank plug stripped?i take it that you went to the equivelant of walmart or some tard place to get oil changed and they refuse to do it because the pan plug is stripped..
this can be repaired by using a heli coil insert or retapping the pan plug hole worst case get a junkyard pan and replace the old one as far as oil pressure goes if your sure its low i would have a shop flush and clean the engine if its older and high miles other than that next time list the make model and yearAnyone knows about engine oil tank plug stripped?well you can buy every thing you need to do the job your self for about what they are going to charge you really and not a hard thin gto fix.. you take a screwdriver and pry a bit on the plug while you try and remove with the right tool....most of the time it wil come on out .. then you get another drain plug... many of thses quick lube places are not willing to work on cars so you can find another shop a real place to change your oil and do work not walmarts or jiffy lube places are place you dont want to go too any timeAnyone knows about engine oil tank plug stripped?I'll actually answer your question... one didnt you ask about the plug not the pan? retards cant read. Answer-Vise Grips, channel locks, needle nose... buy a new plug ruffly 12-18 dollars. take it back to where you went say get that old one out and put this one in. Oil pressure will be greatly affected by the oil filter which is usually replaced with an oil change... after new oil and filter is installed.... and you still have less than 25 psi at idle, your pump may need restoration or replacementAnyone knows about engine oil tank plug stripped?Go to your auto parts store and tell them that your oil plug is stripped. The will show you a repair kit (oversized plug).
But if the HEAD is stripped, then you need one of these:
http://www.sears.com/shc/s/p_10153_12605
===
As for the low oil pressure... you probably need new oil pump.
Good Luck....Anyone knows about engine oil tank plug stripped?If it's the head of the plug, a nut can be welded on the top of it to get it out. Any shop with a lift and a welder can do this. Just get a new plug before you go so they don't try and charge you too much for one.
What size engine can I put in my 1991 honda civic LX?
I want to change the engine on it I wanna throw in a bigger size engine, which one do you recommend? How much money do you think it would cost me?What size engine can I put in my 1991 honda civic LX?the car is almost 20 years old,everything else is shot too.the best place for it is the junk yard.
if you keep it it will nickel and dime you to death.
get a new vehicle and put the video of the junk yard crushing you old honda on youtube.What size engine can I put in my 1991 honda civic LX?you can put any size engine you want but it will coat many $$$$$$$$$$$$$$$$What size engine can I put in my 1991 honda civic LX?you can put any size you want w/ money....but the most practical for that model would be a b series swap...the b16 is a good drop in costing 1000-1500....the b18c would cost a bit more, but the car would need to be converted to obd1 for it to work properly.....the simpliest would be the b18a....its cheap and parts are easier to source from the junk yard....What size engine can I put in my 1991 honda civic LX?i would go for a b series honda motor your car is light enough that a b motor will make it quick... if you want something different and expensive go for a k series motor. if you want something insane but slower go for a d series single overhead cam with a turbo.
its all what you want to do with the car feel free to email me im a biggg honda person..What size engine can I put in my 1991 honda civic LX?I also have issue with the engine. I posted my problems on wish123 and got an excellent advise from an expert. I highly recommend the website!
if you keep it it will nickel and dime you to death.
get a new vehicle and put the video of the junk yard crushing you old honda on youtube.What size engine can I put in my 1991 honda civic LX?you can put any size engine you want but it will coat many $$$$$$$$$$$$$$$$What size engine can I put in my 1991 honda civic LX?you can put any size you want w/ money....but the most practical for that model would be a b series swap...the b16 is a good drop in costing 1000-1500....the b18c would cost a bit more, but the car would need to be converted to obd1 for it to work properly.....the simpliest would be the b18a....its cheap and parts are easier to source from the junk yard....What size engine can I put in my 1991 honda civic LX?i would go for a b series honda motor your car is light enough that a b motor will make it quick... if you want something different and expensive go for a k series motor. if you want something insane but slower go for a d series single overhead cam with a turbo.
its all what you want to do with the car feel free to email me im a biggg honda person..What size engine can I put in my 1991 honda civic LX?I also have issue with the engine. I posted my problems on wish123 and got an excellent advise from an expert. I highly recommend the website!
How do I change the transmission fluid of my car?
I know how to change the engine oil on my car.
However, I don't know when I should change my transmission
fluid and HOW to change the transmission fluid.
My car is a toyota corolla.How do I change the transmission fluid of my car?Take it to a lube center they can hook it up to a system that will flush out all the old fluid till it is clean it will flush all the old fluid out of the valve body and converter you can't do that by just draining the fluid out of the pan .How do I change the transmission fluid of my car?U need only 2 change transmission fluid if the milage is high or the fluid is discoloured, ie a brown colour instead of red. Changing the fluid is the same as engine oil change, locate the plug on the gearbox, remove and drain fluid. Refill with the correct fluid via the gearbox dipstick hole, DO NOT OVER FILL, and ensure no dirt gets in2 the gearbox when refillingHow do I change the transmission fluid of my car?A standard/manual transmission I would not concern myself with until 100k.An automatic has a change schedule in the manual.When you do change it get the gasket/filter kit from your supplier.Get the car lifted and blocked so it can not come down or roll on you. Then place a large pan under the pan. Loosen the pan bolts part way and loosen the pan allowing the fluid to drain.Take the pan off and completely clean away any remnants of the gasket.Do this to the transmission too.You will see the filter in the transmission.Sometimes they are pressure fitted or bolted
Remove filter and replace with new one.Sometimes there are O rings to replace too.Clean the pan and place some Silicone on it to hold/seal the gasket.Reverse the steps and add transmission fluid.I recommend getting a Chilton manual (library?) for your year/model of car to be certain this is done correctly.It is quite easy to do but the bolts have exact torque settings and most transmissions today are aluminum.lock file multiple tables
However, I don't know when I should change my transmission
fluid and HOW to change the transmission fluid.
My car is a toyota corolla.How do I change the transmission fluid of my car?Take it to a lube center they can hook it up to a system that will flush out all the old fluid till it is clean it will flush all the old fluid out of the valve body and converter you can't do that by just draining the fluid out of the pan .How do I change the transmission fluid of my car?U need only 2 change transmission fluid if the milage is high or the fluid is discoloured, ie a brown colour instead of red. Changing the fluid is the same as engine oil change, locate the plug on the gearbox, remove and drain fluid. Refill with the correct fluid via the gearbox dipstick hole, DO NOT OVER FILL, and ensure no dirt gets in2 the gearbox when refillingHow do I change the transmission fluid of my car?A standard/manual transmission I would not concern myself with until 100k.An automatic has a change schedule in the manual.When you do change it get the gasket/filter kit from your supplier.Get the car lifted and blocked so it can not come down or roll on you. Then place a large pan under the pan. Loosen the pan bolts part way and loosen the pan allowing the fluid to drain.Take the pan off and completely clean away any remnants of the gasket.Do this to the transmission too.You will see the filter in the transmission.Sometimes they are pressure fitted or bolted
Remove filter and replace with new one.Sometimes there are O rings to replace too.Clean the pan and place some Silicone on it to hold/seal the gasket.Reverse the steps and add transmission fluid.I recommend getting a Chilton manual (library?) for your year/model of car to be certain this is done correctly.It is quite easy to do but the bolts have exact torque settings and most transmissions today are aluminum.
Subscribe to:
Posts
(Atom)